DashBot

DashBot is a cool and amazing dual drive robot that is compatible with Lego.
He is smarter, tougher, and even more incredible than CricketBot.

You can add extra RoboBloX to give DashBot extra skills and abilities.

DashBot Challenges

 

Theory

DashBot is a fast little Dual Drive robot. You can add extra RoboBloX to give DashBot extra skills and abilities.

Assembly

1. Materials Required

   
   
   • 1x BrainBlock
   • 1x PowerBlock
   • 1x DriverBlock
   • 2x GoBlocks
   • 2x RollBlocks
   • 1x BatBlock
   • 4x Bricks (2x10)
     

2. RoboBloX Required

   • BrainBlock
   • PowerBlock
   • DriverBlock (Plus Cable)
   • GoBlocks
   • BatBlock (Plus Cable)
   
   Make sure you have completed all the RoboBlocks needed to build your DashBot
3. 
   Place two 2x10 bricks on the bottom of the PowerBlock in the middle
4. 
   Place two GoBlocks onto the new 2x10 bricks
5. 
   Try to loop the wires as shown
6. 
   Place two 2x10 bricks on top of the PowerBlock and GoBlocks
7. 
   Place the DriverBlock on the very back of the PowerBlock (the end with the USB connector)
   Plug both GoBlock cables into the DriverBlock
8. 
   Place the BrainBlock on the front of the PowerBlock
   Connect the DriverBlock to the BrainBlock with the DriverBlock cable
9. 
   Place the RollBlocks (wheels) onto the GoBlocks
   
10. 
    Stick the BatBlock onto the front of the PowerBlock
11. 
    Double check that your DriverBlock cable is the right way around
    BEFORE you plug in your USB cable from the BrainBlock to the PowerBlock
    Remember to look for the silver marks you made on it
    
12. 
    Plug the USB cable into the BrainBlock and PowerBlock
13. 
    You're Done! DashBot should look like this.
    

 

You are ready for the

DashBot Challenges!!

 

---

 

Suggested Pins

Most Blocks can be connected to any pin,
this just helps plan out the use of each pin.
This helps avoid moving all your wires when you add a new block

Pin	Block	Detail
0		USB RX
1		USB TX
2	BatBlock	Echo
3	BatBlock	Trig
4	DriverBlock	Left Motor
5	DriverBlock	Left Motor
6	DriverBlock	Right Motor
7	DriverBlock	Right Motor
8	FaceBlock	CS
9	BeepBlock
10	MemoryBlock	CS
11	MemoryBlock	MISO
12	FaceBlock	DIN
13	FaceBlock	CLK

 

Pin	Block	Use
A0	EyeBlock	Left
A1	EyeBlock	Right
A2	EarBlock
A3	BlinkBlock
A4	ButtonBlock	I2C SDA
A5		I2C SCL
A6	LineBlock	Left
A7	LineBlock	Right